صنعت » الکترونیک
فروش ترانسدیوسر Current/Voltage Transducer
•
FERRAZ SHAWMUT – WESTCODE - SEMIKRON – SIEMENS – IXYS - BUSSMANN – LAWSON – GEAN MULLER – LINDER – CELDUC – CROUZET – SIBA - CROUZET- MITSUBISHI - LS - HUBNER –LAWSON – HEIDEN HAIN-DAITO
WACHENDORFF
انواع ترنسدیوسرها (مبدل) Transducer
انواع ترانسدیوسر
طبق آخرین تکنولوژی روز دنیا
حتی در اندازه های کوچک و سبک
انواع مبدل (ترانسدیوسر) برای اندازه گیری پارامتر های صنعتی
انواع مبدل (ترانسدیوسر) فشار ، فشار خلا ، فشار مواد مذاب
مدلهای مناسب برای تمام سیالات و روغن های صنعتی
مدل های مناسب برای حرارت های بالا
انواع ترانسدیوسر (مبدل) ولتاژ ، ولتاژ های پایین ، ولتاژ های خیلی بالا
انواع ترانسدیوسر (مبدل) جریان
انواع ترانسدیوسر (مبدل) مقاومت
انواع ترانسدیوسر (مبدل) فرکانس
انواع ترانسدیوسر (مبدل) توان
Current/Voltage Transducer - Con I/Con V
Rishcon-V/I measures and convert AC V or I of RMS input signal to proportional 1or2 analog output load dependent Vdc or independent Idc. Universal Aux with accuracy ±0.2% & TRMS measurement. Onsite input output configurable, 7Segment LCD Display, RS485 communication.
Frequency Transducer Rish Con Hz
Rishcon-Hz where output signal is proportional to measured frequency with1 or 2 analog output load dependent Vdc or independent Idc. Universal Aux with accuracy ±0.2%. Onsite input, output configurable, 7 Segment LCD Display, RS485 (Modbus) communication.
Power Transducer Rish Con P
Rishcon-P converts active, reactive & apparent power of 1Ø /3Ø balanced or unbalanced loads into proportional 1or2 analog output load dependent Vdc or independent Idc. Universal Aux with accuracy ±0.2%,TRMS type Onsite input/output configurable,7 Seg LCD display, RS485
Current/Voltage Transducer - E13 (3 Channel)
Rishducer E13 convert a 3 sine waves AC voltage (upto 750V) or Current (upto 10A) of sine waveform into proportional 3 analog output load dependent Vdc or independent Idc based on arithmetical mean value measuring, calibration to RMS with sine waveform, AC or DC Aux supply
Current/Voltage Transducer - E15
Rishducer E15 convert a sine wave AC voltage (upto 500V) or Current (upto 6A) of sine waveform into proportional 1 or 2 analog output load dependent Vdc or independent Idc based on arithmetical mean value measuring, calibration to RMS with Sine waveform, AC or DC Aux supply
Current/Voltage Transducer - Ixx/Vxx Series (TRMS/AVG)
Rishducer Ixx /Vxx series Tranducer is used to convert sine-wave or distorted AC current or voltage into proportional 1 or 2 analog output load dependent Vdc or independent Idc. Self powered or Aux supply with Accuracy ±0.5% or ± 0.2%. TRMS or Avg type measurement
Frequency Transducer - F11/ F12
F11/F12 convert Frequency in the range 45…65Hz or 360…440Hz of AC voltage (upto 480V) into proportional 1or2 analog output load dependent Vdc or independent Idc. AC/DC Aux with Accuracy of F11 ±0.5% & F12 ±0.2%.Open & short-circuit protection
Active or Reactive Transducer - P11
P11 converts active,reactive sine or distorted signals of I(10A) or V(660V) of 1Ø or 3Ø balanced/unbalanced loads into proportional 1or2 analog load dependent Vdc or independent Idc by TDM-PDM measuring principle1,2,3 wattmeter method. AC/DC aux supply
Phase Angle Transducer (PF) - C11
C11 measures the phase angle between range of I(10A) or V(660V) of 1Ø or 3Ø balanced network having a sine wave into proportional 1 or 2 analog output load dependent Vdc or independent Idc. Based on Zero crossing measuring principle, AC/DC Universal Aux
Phase Angle Difference Transducer - C12
C12 measures the phase angle difference of 2 synchronized supplies of 10 to 660V, measuring range ±60 and ±175 °el having a sine or distorted wave into proportional 1or2 analog output load dependent Vdc or independent Idc based on Zero crossing measuring principle with AC/DC Aux
Programable Multifunction Transducer - Mxx Series
Mxx series simultaneously measure several variables of electric power system converting them into 2,3 or 4 analog output, 2 or 4 digital output for signaling limits, power metering, limit output AND/OR, Output Simulation, acquisition of meter data, mark setting with universal supply
Programable Multifunction Transducer - M40/M30
Passive DC Signal Isolator Rish ducer TI816
Electrically insulates analog DC signals, i/p range 0(4)…20mA & o/p range 0(4)…20mA or 0(2)…10V, RLoad max 500 OHM, self powered, Accuracy ±0.2%, Prevents the transfer of interference V&I, solves grounding problems in meshed signal network
Passive DC Signal Isolator Rish ducer TI807 (1,2,3 Channel)
Electrically insulates 1,2,3channel analog DC signals i/p range0(4)…20mA & o/p range 0(4)…20mAor 0(2)…10V RLoad max500 OHM self powered Accuracy ±0.2% Insulation 3.7KV Prevents transfer of interferenceV&I, solves grounding problem in meshed signal network
Isolating Amplifier Rish ducer TV808
DC isolating amplifier to electrically insulate i/p & o/p signals at2.3KV &power supply at3.7KV or amplify the signal levels in 252 i/p [0..1000V, ±20mA, ±20V] o/p [±20mA, ±10V] combinations selected by soldered jumpers, RLoad Max600 OHM Accuracy±0.2%
Configurable Transmitter Rish ducer PT602
Converts input variable a signal from Pt 100 at Temp (170 - 800°C) to linear output signal. Version 2,3,4 wire connections 1,2 channel i/p o/p, Measuring ranges configurable with DIP switches. Universal AC/DC aux Accuracy±0.5%, Insulation 3.7KV, Sensor open/short circuit indicator
Programmable Universal Transmitter Rish ducer V604
Onsite Programmable universal transmitter Converts input Idc or Vdc, Thermocouple, RTD or remote sensor to a proportional 2 analog o/p signal. Open circuit sensor supervision, trip point setting(-10to110%) Universal AC/DC Aux. Accuracy ±0.2% Automatic calibration for lead compensating
Programmable Tap position Transducer Rish ducer TP-25K
Onsite Programmable input tap resistance (2/3/4/WF/WF/DIN) upto 25kOHM is converted to proportional 2 analog o/p signal either Idc or Vdc, simulation facility, detects open circuit, output charact. linear or A=Square root of M, or M to power of 3/2. Universal AC/DC aux
Programming Cable PRKAB 600
The programming cable PRKAB 600 serves to connect Rishducer V604, TP-25K transducers to a PC on which PC software is installed for purposes of programming the transducer. Cable provides electrical insulation between the PC and the transducer. Transmitter prog. connector FCC-68 and ancillary cable.
Rish CON SI 101 - Powerful DC Signal Isolator
Powerful DC Signal Isolator - Rish CON SI101 electrically isolates the input, output & power supply The isolator fulfills all the requirements concerning EMC and safety (IEC 61010).Onsite selectable DIN rail & wall mounting
Programmable Tap position transducer Rish CON TPT
Programmable input tap resistance(2/3/4 wire measurement) upto 25kOHM is converted to proportional 1 or 2 analog o/p signal either Idc or Vdc, Universal AC/DC aux With LED Display.
RISH CON SI-102 (Dual output DC isolator )
Rish CON SI-102 Two electrically isolated analog outputs prevent interference voltage and current. Solves grounding problem in meshed signal networks.The device has one input and provides two independent outputs in an extremely small space.
M40/30 simultaneously measure several variables of electric power system and converts them into 3 or 4 analog output, Modbus (RS485) communication, output &power system simulation, acquisition of meter data, password protect, 4 integrated energy meters, mark setting, universal Aux
Programable Multifunction Transducer - M01 (Modbus Communication)
M01 is a programmable with RS485 bus interface, enable users to determine and supervise several parameter of electric power system with Modbus (RS485), power system Simulation, acquisition of meter data, password protect, 4 integrated energy meters, mark setting. Universal aux
Programable Multifuntion Transducer - M00 (LONbus communication)
M00 is programmable with LONWORKS interface, enable users to determine and supervises several parameter of electric power system programmed using LONTALK file transfer protocol. The measured variables transferred by means of standard network variable types (SNVT). Universal aux
Programable Multifunction Transducer - Rish Trans (Display, Modbus and Analog output)
Rish Trans measures important electrical parameters in 3 phase network and replaces the multiple analog panel meters. Measures Electrical parameter like AC current, Voltage, Hz, P, Q, S, PF,QF, LF. The Instruments has 4 Analog output, RS232, RS485, 7 segment display (optional). Universal aux
Current / Voltage Transducer Rish CON CA / CON CV (TRMS)
Rishcon-CA/CV measures and convert AC I or V input signal to proportional analog output load dependent Idc or independent Vdc. Wide Auxiliary power supply Aux with accuracy ±0.2% & TRMS measurement.Narrow housing, 22.5 mm.
Current / Voltage Transducer Rish CON CA / CON CV
Rishcon-CA/CV measures and convert AC I or V input signal to proportional analog output load dependent Idc or independent Vdc. Wide Auxiliary power supply Aux with accuracy ±0.2%, Narrow housing, 22.5 mm
نصب نسخه جدید iOS اپلیکیشن ایفروش