صنعت » ماشین آلات

خط تولید بازیافت لاستیک به گازوییل 09141552808

خط تولید بازیافت لاستیک به گازوییل :

تجزیه و تحلیل وزن سنجی محصولات پیرولیز زباله تایر از راکتوری که در بهترین حالت کار می کند
شرایط روغن پیرولیز تایر (TPO): 45٪، کربن سیاه در اثر حرارت (PCB): 35٪، گاز پیرولیز (Pyro-Gas):
10٪ و سیم فولادی: 10٪. می توان نتیجه گرفت که کلر و گوگرد در PCB متمرکز شده است
کسر به دلیل ماهیت ترکیب لاستیک. تقریبا تمام کلر موجود در لاستیک ها بود.
Products that can reduce the fuel crisis. Gravimetric analysis of tire waste pyrolysis
Pyrolysis plant products that work in optimal conditions are: Tire pyrolysis soil (TPO):
45% black carbon pyrolysis (PCB): 35%, pyrolysis gas (Pyro-Gas): 10% and steel wire: 10%. These
The results depend on the type and size of the tire. It is found that the pyrolysis oil produced has a
High calorific value (HHV), with the range 42-43 (MJ / kg), which can make it useful as an alternative.
For conventional liquid fuels, the main drawback is the use of TPO as its pungent odor fuel
And its low flash point compared to other conventional liquid fuels. Pyrolysis produced
Carbon black also has a high calorific value (HHV) of about 29 (MJ / kg) which can encourage it as well.
Use as solid carbon black fuel can also be used as activated carbon, printer ink and so on
Pyro-Gas obtained from waste tires is mainly composed of light hydrocarbons. the door
H2 concentration has a volume range of 30 to 40% and has a high calorific value (approx
31 megajoules per cubic meter) that can meet the process energy needs. On the other hand it is necessary
Clean gas before the combustion process to remove H2S from Pyro-Gas and thus reduce acid rain
Question. However, for the current factory, some recommendations should be followed for more
Comfortable operation and safer working conditions

Gravimetric analysis of tire waste pyrolysis products from the reactor that works best
Tire pyrolysis oil (TPO) conditions: 45%, pyrolysis carbon (PCB): 35%, pyrolysis gas (Pyro-Gas):
10% and steel wire: 10%. It can be concluded that chlorine and sulfur are concentrated in the PCB
Deduction due to the nature of the rubber composition. Almost all of the chlorine was in the tires
09128720152
09124172904

322
بازدید

آگهي هاي صنعت » ماشین آلات

صنعت